ITER
International Thermonuclear Experimental Reactor
CAD model of ITER
Publications
UWFDM-1348 Radiation Streaming in Gaps Between ITER First Wall/Shield Modules; T.D. Bohm, M.E. Sawan, P. Wilson, September 2008 [presented at the 18th ANS Topical Meeting on Fusion Energy, 28 September-2 October 2008, San Francisco CA].
UWFDM-1349 Source Profile Analysis for the ITER First Wall/Shield Modules; B. Smith, P. Wilson, M. Sawan and T. Bohm, September 2008 [presented at the 18th ANS Topical Meeting on Fusion Energy, 28 September-2 October 2008, San Francisco CA].
UWFDM-1355 Physics and Technology Conditions for Attaining Tritium Self-Sufficiency for the DT Fuel Cycle; M.E. Sawan and M.A. Abdou, February 2006 [published in Fusion Engineering and Design, 81 (2006) 1131-1144].
UWFDM-1356 Nuclear Analyses for Two "Look-Alike" Helium-Cooled Pebble Bed Test Blanket Sub-Modules Proposed by the US for Testing in ITER; M.Z. Youssef, M.E. Sawan and A. Ying, February 2006 [published in Fusion Engineering and Design, 81 (2006) 1567-1576].
Neutronics Features of a Dual Coolant Lithium Lead Test Blanket Module for ITER;
M.E. Sawan and M.Z. Youssef,
September 2005 [presented at the 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE), 26-29 September 2005, Knoxville TN].
(1 page, 1.4 MB)
Assessment of the Activation, Decay Heat, and Waste Disposal of a Dual Coolant Lithium Lead Test Blanket Module for ITER;
M.Z. Youssef and M.E. Sawan,
September 2005 [presented at the 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE), 26-29 September 2005, Knoxville TN].
(1 page, 821 kB)
Quantifying the Advantages of Counter Flow Helium First Wall Cooling: A Thermal-Hydraulic Comparison of ITER TBM First Wall Cooling Designs;
G. Sviatoslavsky, M. Dagher, P. Calderoni, C.P.C. Wong,
September 2005 [presented at the 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE), 26-29 September 2005, Knoxville TN].
(1 page, 880 kB)
3-D Neutronics Analysis of the ITER First Wall/Shield Module 13;
B. Smith, P.P.H. Wilson, M.E. Sawan,
June 2007 [presented at the 22nd IEEE/NPSS Symposium on Fusion Engineering, 17-21 June 2007, Albuquerque NM].
(1 page, 5.8 MB)
Radiation Streaming in Gaps Between ITER First Wall/Shield Modules;
T.D. Bohm, M.E. Sawan, P. Wilson,
September 2008 [presented at the 18th ANS Topical Meeting on Fusion Energy, 28 September-2 October 2008, San Francisco CA].
(1 page, 1.7 MB)
Source Profile Analysis for the ITER First Wall/Shield Module 13;
B. Smith, P.P.H. Wilson, M. Sawan, T. Bohm,
September 2008 [presented at the 18th ANS Topical Meeting on Fusion Energy, 28 September-2 October 2008, San Francisco CA].
(1 page, 14 MB)
Neutronics Performance Parameters for the US Dual Coolant Lead Lithium ITER Test Blanket Module;
M.E. Sawan, E.P. Marriott, M. Dagher,
May 2009 [presented at the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA].
(1 page, 2.7 MB)
Benchmarking FENDL-2.1 with Impact of ENDF/B-VII.0 Release on Nuclear Heating and Damage;
M.E. Sawan,
May 2009 [presented at the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA].
(1 page, 1.7 MB)
Nuclear Heating In Critical Components Of Alternative ITER First Wall Attachment Mechanism;
P.P.H. Wilson, M.E. Sawan, E.P. Marriott, M.A. Ulrickson,
May 2009 [presented at the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA].
(1 page, 580 kB)
UWFDM-1367 Nuclear Heating in Critical Components of Alternative ITER First Wall Attachment Mechanism; P.P.H. Wilson, M.E. Sawan, E.P. Marriott, M.A. Ulrickson, May 2009 [prepared for the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA]. (5 pages, 422 kB)
UWFDM-868 Magnet Shielding Effectiveness of the Proposed Blankets for ITER; L.A. El-Guebaly, September 1991 [Presented at the 14th IEEE/NPSS Symposium on Fusion Engineering, 30 September - 3 October 1991, San Diego CA; published in Proc. IEEE]. (6 pages, 547 kB)
UWFDM-1051 Nuclear Heating and Damage Profiles in the ITER Divertor Cassette; M.E. Sawan and R.T. Santoro, September 1997 [Presented at the 17th IEEE/NPSS Symposium on Fusion Engineering, 6-10 October 1997, San Diego CA]. (6 pages, 163 kB)
UWFDM-1052 3-D Thermo-Mechanical Analysis of the ITER Limiter Small Scale Specimen; E.A. Mogahed and I.N. Sviatoslavsky, October 1997 [Presented at the 17th IEEE/NPSS Symposium on Fusion Engineering, 6-10 October 1997, San Diego CA]. (6 pages, 279 kB)
UWFDM-1083 Activation Analysis for the ITER Divertor Cassette; H.Y. Khater and M.E. Sawan, June 1998 [Presented at the 13th Topical Meeting on the Technology of Fusion Energy, June 7-11, 1998, Nashville TN]. (6 pages, 177 kB)
UWFDM-1360 Neutronics Performance Parameters for the US Dual Coolant Lead Lithium ITER Test Blanket Module; M.E. Sawan, E.P. Marriott, M. Dagher, May 2009 [prepared for the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA]. (6 pages, 1.7 MB)
UWFDM-1361 Benchmarking FENDL-2.1 with Impact of ENDF/B-VII.0 Release on Nuclear Heating and Damage; M.E. Sawan, May 2009 [prepared for the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA]. (6 pages, 550 kB)
UWFDM-811 Shielding Design Options for the TF Magnets of ITER; L.A. El-Guebaly, October 1989 [Presented at the 13th Symposium on Fusion Engineering, 2-6 October 1989, Knoxville TN; published in Proc. IEEE]. (7 pages, 523 kB)
UWFDM-813 An Aqueous Lithium Salt Blanket for ITER; M.E. Sawan, I.N. Sviatoslavsky, G.L. Kulcinski, J.P. Blanchard, H.Y. Khater, E.A. Mogahed, L.J. Wittenberg, October 1989 [Presented at the 13th Symposium on Fusion Engineering, 2-6 October 1989, Knoxville TN; IEEE Cat. No. 89CH2820-9, Vol. 1, 74]. (7 pages, 607 kB)
UWFDM-923 A Complete Loss of Coolant Accident (LOCA) Analysis for the Inboard Component of ITER CDA; E.A. Mogahed, M.E. Sawan, H.Y. Khater, October 1993 [presented at 15th IEEE/NPSS Symposium on Fusion Engineering,. 11-14 October 1993, Hyannis MA]. (7 pages, 633 kB)
UWFDM-1020 ITER Limiter First Wall 3-D Thermo-Mechanical Analysis; E.A. Mogahed and I.N. Sviatoslavsky, May 1996 [Presented at the 12th Topical Meeting on the Technology of Fusion Power, 16-20 June 1996, Reno NV]. (7 pages, 727 kB)
UWFDM-1030 Three-Dimensional Neutronics and Shielding Analyses for the ITER Divertor; M.E. Sawan, L. Petrizzi, R.T. Santoro, D. Valenza, June 1996 [Presented at the 12th Topical Meeting on the Technology of Fusion Power, 16-20 June 1996, Reno NV]. (7 pages, 588 kB)
UWFDM-1274 Neutronics Features of a Dual Coolant Lithium Lead Test Blanket Module for ITER; M.E. Sawan and M.Z. Youssef, September 2005 [presented at the 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE), 26-29 September 2005, Knoxville TN]. (7 pages, 863 kB)
UWFDM-1328 Three Dimensional Neutronics Analysis of the ITER First Wall/Shield Module 13; B. Smith, P.P.H. Wilson, M.E. Sawan, June 2007 [presented at the 22nd IEEE/NPSS Symposium on Fusion Engineering, 17-21 June 2007, Albuquerque NM]. (7 pages, 2.9 MB)
UWFDM-1024 Radiological Dose Rate Calculations for the International Thermonuclear Experimental Reactor (ITER); H.Y. Khater and R.T. Santoro, June 1996 [Presented at the 12th Topical Meeting on the Technology of Fusion Power, 16-20 June 1996, Reno NV]. (8 pages, 615 kB)
UWFDM-1077 Three-Dimensional Neutronics Analysis for the ITER Divertor Cassette Design Options; M.E. Sawan, R.T. Santoro, June 1998 [Presented at the 13th Topical Meeting on the Technology of Fusion Energy, June 7-11, 1998, Nashville TN]. (8 pages, 294 kB)
UWFDM-1279 Assessment of the Activation, Decay Heat, and Waste Disposal of a Dual Coolant Lithium Lead Test Blanket Module for ITER; M.Z. Youssef and M.E. Sawan, September 2005 [presented at the 21st IEEE/NPSS Symposium on Fusion Engineering (SOFE), 26-29 September 2005, Knoxville TN]. (8 pages, 1.2 MB)
UWFDM-1363 Application of CAD-Neutronics Coupling to Geometrically Complex Fusion Systems; M.E. Sawan, P.P.H. Wilson, T. Tautges, L.A. El-Guebaly, D.L. Henderson, T.D. Bohm, E.P. Marriott, B. Kiedrowski, B. Smith, A. Ibrahim, R. Slaybaugh, May 2009 [prepared for the 23rd Symposium on Fusion Engineering (SOFE), May 31-June 5, 2009, San Diego CA]. (8 pages, 2.8 MB)
UWFDM-774 Tungsten versus Steel in Inboard Shield of ITER: Impact on Magnet Damage, Reactor Size, and Cost; Laila A. El-Guebaly, Mohamed E. Sawan, October 1988 [presented at the 8th Topical Meeting on the Technology of Fusion Energy, 9-13 October 1988, Salt Lake City UT; Fusion Tech. 15, No. 2, Part 2B, 881 (1989)]. (9 pages, 870 kB)
UWFDM-775 An Aqueous Lithium Salt Self-Cooled Blanket and Shield for ITER; M.E. Sawan, I.N. Sviatoslavsky, G.L. Kulcinski, October 1988 [presented at the 8th Topical Meeting on the Technology of Fusion Energy, 9-13 October 1988, Salt Lake City UT; Fus. Tech. 15/2 (1989) 643]. (9 pages, 824 kB)
UWFDM-777 Activation Analysis for the Aqueous Self-Cooled Blanket and Shield of ITER; H.Y. Khater, M.E. Sawan, S.W. Lomperski, I.N. Sviatoslavsky, October 1988 [presented at the 8th Topical Meeting on the Technology of Fusion Energy, 9-13 October 1988, Salt Lake City UT]. (9 pages, 876 kB)
UWFDM-827 Overview of the US-ITER Magnet Shield: Concept and Problems; L.A. El-Guebaly, October 1990 [Presented at the 9th Topical Meeting on the Technology of Fusion Energy, 7-11 October 1990, Oak Brook IL; Fusion Tech. 19, No. 3, Part 2B, 1475 (1991)]. (9 pages, 667 kB)
UWFDM-832 Thermal Analysis of the Blanket and Shield for the U.S. ITER Design; E.A. Mogahed and I.N. Sviatoslavsky, October 1990 [Presented at the 9th Topical Meeting on the Technology of Fusion Energy, 7-11 October 1990, Oak Brook IL (Fus. Tech. 19 (3) Pt. 2A 1546-1551)]. (9 pages, 742 kB)
UWFDM-836 Mechanical Design and Fabrication of the U.S. Solid Breeder Blanket for ITER; I.N. Sviatoslavsky, October 1990 [Presented at the 9th Topical Meeting on the Technology of Fusion Energy, 7-11 October 1990, Oak Brook IL]. (9 pages, 852 kB)
UWFDM-838 Three-Dimensional Neutronics Analysis for the US Magnet Shield of ITER; M.E. Sawan and L.A. El-Guebaly, October 1990 [Presented at the 9th Topical Meeting on the Technology of Fusion Energy, 7-11 October 1990, Oak Brook IL; Fusion Tech. 19 (1991) 1469]. (9 pages, 602 kB)
UWFDM-839 Three-Dimensional Neutronics Analysis of the US Blanket Design for ITER; M.E. Sawan, October 1990 [Presented at the 9th Topical Meeting on the Technology of Fusion Energy, 7-11 October 1990, Oak Brook IL; Fusion Tech. 19 (1991) 1513]. (9 pages, 610 kB)
UWFDM-939 Shielding Effectiveness of Candidate Structural Materials and Liquid Metal Coolants for the ITER Blanket; M.E. Sawan and L.A. El-Guebaly, January 1994 [prepared for the 8th International Conference on Radiation Shielding, April 24-28, 1994, Arlington TX]. (9 pages, 612 kB)